It was a question about paler colors and I thought an article would be helpful to address this issue.

When painting, there are two ways you can get paler colours. This pale colour is usually reserved for highlighted areas, or places where the light is shining on the subject you’re painting – visit us!

1. It is possible to paint just a thin coating of paint, allowing the paint surface’s white color to shine through. As long as the surface is pale, this works. In general, you’ll be.

2. A tint is created by adding white to a colour. The only time it doesn’t work is when red is used. You will get pink if you add white to the red. That’s probably not what was intended! It was the primary question.

Red Highlights for

If you’re painting a surface that isn’t white, you can first paint the area where the highlights are in white. Let it dry then paint a thin coat of red overtop to achieve the effect described above. It will work on other colours as well.

Let the paint completely dry, then add a light layer of white. You can use quite a wet mix to allow some of the color red through. The white colour is opaque in acrylics, and it can appear chalky when applied thickly.

You can also apply additional layers to darken the colour. Add more layers to the paint and it will look richer. With just one paint layer, these richer colored areas can enhance the highlighted effect.

It is very effective. One layer of paint is used for the highlights, but more layers are added to the dark and middle parts of the paper.

Add shadow shades to the red to get an excellent result.

It will be determined by what you plan to paint. The purple could be made with some blue. You can also add the complementary colour to the red (for instance, green). This will make the color more neutral.